NE 200 Series

Flexible, Retrofit-Friendly Two-Compressor Dehumidifier

Designed specifically to solve all the challenges of the retrofit and replacement market, the NE 200 Series packs twice the dehumidification capacity into the already small footprint of the NE Series. This dual-compressor dehumidifier is loaded with great features and is ideal for installations requiring 45 to 186 lbs/hr of moisture removal and 2,600 to 13,500 CFM of air handling.

ADVANTAGES

  • Model 214 fits through a 32-inch doorway and delivers up to 83 lbs/hr of moisture removal with 6,750 CFM of air handling
  • A fully modular system, with two compressors, two supply air fans, and two cabinets – all in one package
  • Dual compressors provide scalable performance and optimum energy efficiency under all conditions
  • Can be easily split at the job site for retrofit in existing buildings – just a wire harness to connect, no refrigeration piping is affected
  • Two-sided service access for tight installations
  • Single-phase electrical power available up to a 12-ton system

STANDARD FEATURES

  • Pool water heater provides energy savings
  • Direct-drive backward inclined airfoil plenum fans offer greater reliability and energy efficiency than belt-driven systems
  • Fully-dipped coils for maximum corrosion protection – not just the fins!
  • Service vestibule outside of the air stream protects critical components, maximizes AC efficiency, and empowers ease of service
  • Extraordinary compressor protection: refrigeration pressure transducers on suction and discharge; 24/7 monitoring of critical suction and discharge pressures; pump down, crankcase heater, voltage monitor; oil separator and oil monitoring
  • Superior outdoor cabinet construction: two-inch insulation, double-wall construction, with MERV-13 filters
  • Control features include airflow switch, dirty filter switch, and smart pool/pump capability
  • Multiple compressor systems for staged control
  • Sight glasses on receivers for easy field charging of split systems
  • Flexible supply and return air openings – multiple openings also possible
  • Mirror configurations available to suit duct work requirements
  • Motorized evaporator bypass damper for proper evaporator loading and maximum efficiencies
  • Motorized outdoor air on/off damper tied to built-in seven-day time clock

OPTIONS

Air conditioning: air cooled or water cooled, split or packaged
Auxiliary air heating
(electric, hot water, or gas)
Purge mode
with economizer

PERFORMANCE SUMMARY

NE 200 Series 208 210 212 214 216 220 224 228 232 
Max. Supply Airflow (CFM) 6,750 6,750 6,750 6,750 13,500 13,500 13,500 13,500 13,500 
Moisture Removal (lb/hr) 47.8 59.8 71.8 83.7 95.7 119.6 143.5 153.4 186.6 
Sensible Cooling (MBH) 63.2 78.9 94.7 110.5 126.3 157.9 189.5 202.6 246.4 
Pool Water Heating (MBH) 72 87 102 126 144 186 252 280 310 
Rated Conditions Pool Room Air: 82°F / 60% R.H. | Pool Water: 80°F

BROCHURE